Products

TILT CYLINDER 2.13" OD x 14.75" center hole to center hole (retracted) Includes:Cylinder, (8) Cable Tie (8" Black) (RPI Part #RPT085) (4) Cable Tie (8" Black) (RPI Part #RPT279) Also Available: Hydraulic Fluid (RPI Part #RPF384) Fits: Table Base Model(s)...

TILT SWITCH PELTON & CRANE Momentary contact (On/Off/On) 6A @ 125VAC; 3A @ 250VAC Snap in mounting White Paddle Fits: Back assembly (Chairman) and Foot Switch Assembly (Chairman 5090) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCS717

TIME DELAY RELAY 15A @ 120VAC Heat Time: 20-70 seconds; Cool Time: 50-80 seconds Mounts to bottom plate Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCR078

TIME DELAY RELAY KIT 1A @120 VAC/DC Preset: .20 sec. delay .25" Tabs Includes wire assemblies Fits: Cylinder Solenoids Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIR017

TIME SWITCH (60 MIN) 60 Minutes, Bell Alert 20A @ 125VAC / 10A @ 250VAC SPST Shaft: 3/16" dia. x 11/16" lg. Double Flat Size: 1-7/8" x 1-7/8" x 1-1/2" DP Mount: 2 Hole - # 6-32 @ 1-1/8" apart...

TIMER CLAY ADAMS® (BECTON DICKINSON) 3 Minutes, No Alert 15a @ 120VAC SPST Shaft: 3/16" dia. x 7/16" lg. Size: 2.00" OD x 2.00" lg. Mount: 3/8-32 x 5/16" lg. bushing Motor: 120VAC / 60HZ (CCW) Fits: Front Panel Model(s)...

TIMER (30 MIN) Includes mounting screws Timer Knob sold separately - see RPI Part #RCK092 or RPI Part #RCK111 The Wire Harness (RPI Part #RCH117) may be needed to extend the length of the original Wire Harness when upgrading to...

TIMER (60 MINUTE) 60 minutes without hold 15A per pole; 120/240V; DPST Shaft:.250" dia. x .79 lg.; "D" Flat Size: 1.97" x 1.79" x 1.15" DP.; 1/4" Tabs Includes: Mounting hardware Also available: Thermostat Knob (RPI Part #TUK050) Fits: 60...

TIMER ASSEMBLY/MECHANICAL TIME SWITCH (60 MINUTE) 60 minutes, Bell timer 20A @ 120-140VAC; SPST Shaft: 3/16" dia. x 7/16" lg. Double Flat Size: 2-9/16" dia. x 1-3/4" DP Mount: 3/8-24 x 1/4" lg. Bushing Includes: (2 pc) Terminal Screw Fits:...

TIMER GEAR 30 teeth Black polyacetal Mounts on Idler Gear Shaft Fits: Shutter Release Section (Transport Assembly) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ATG605

TIMER KIT (30 MIN) Timer Knob sold separately - see RPI Part #RCK092 or RPI Part #RCK111 The Wire Harness in this Kit may be needed to extend the length of the original Wire Harness when upgrading to this style...

TIMER KNOB CLAY ADAMS® (BECTON DICKINSON) Size: 1-1/4" dia. x 5/8" tall Black plastic body with white top and pointer Fits 3/16" Shaft Includes set screw Fits Sero-Fuge II timer with 3/16 round shaft Fits: Timer shaft Model(s) This Part...

TIMING LIGHT (RED) 120VAC, 1/3W Includes timing light, 8" leads, push-on connectors, and jump wire Fits: Control Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCL076

Tips for GentleCLEAN™ Insert (Pkg. of 50 pcs.) For use with the GentleClean™ 30KHz Soft-Grip insert. Removes biofilm plaque and soft calculus from metal and teeth. Safe enough to use on implants and orthodontic brackets. Will not scratch Titanium, Zirconia, or...

Tofflemire Matrix Bands from WaterPik are made of surgical grade stainless steel and are carefully stamped for consistently smooth (burr-free) edges that keep your patient comfortable and reduce risk of gingival trauma. Available in a variety of sizes and contours,...