RPI

5 LEADWIRE SET DISPOSABLE 24" DIN/SNAP HEWLETT PACKARD/AGILENT/ZYMED/PHILIPS MEDICAL Disposable; 10 sets per package Number of Leads: 5 ; Length: 24" Equipment End: Din/Unshielded; .060" Safety Socket; Patient End: Snap Color: Red, White, Green, Black, and Brown For a Reusable...

CHECK VALVE (1-1/4") 1-1/4" FPT Material: Bronze body; PTFE seal Cracking pressure: 0.5 PSI Size: ~2.37" OD X 4.18" LG Fits: In Line (Conbraco) Model(s) This Part Fits: 6900 Series

DUAL HEATING ELEMENT 120VAC, 1350W (~10ohm); 100W (~144ohm) Sheathing: Electrogalvanized Sheet Stell Mounts on outside of chamber Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCH027

VACUUM RELIEF VALVE REPAIR KIT Includes: Sealing ball, piston, spring, adjustment screw and hex nut Allows customer to rebuild the Dental-EZ Vacuum Relief Valve (OEM Part #64622001) Also available: Filter Element and Screen (RPI Part #VPE067) Fits: Vacuum Relief Valve...

DUAL HEATING ELEMENT 1350W, 120VAC, ~10ohm; 100W, ~144ohm Sheathing: Electrogalvanized Sheet Steel Mounts on outside of chamber Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCH026

LIGHT SOCKET KIT All parts also sold separately! Fits: Light Head Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BEK027

AIR VENT BELLOWS 5/16" compression fittings-both ends Fits: Mounts between chamber and reservoir tubing Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AMB168

SOLENOID VALVE REPAIR KIT For Piston style valve PTFE seal Includes all parts as shown Fits Castle/Getinge Valve No. 517353 only Fits: 3523 (Sol-7 Multitherm Bypass) Model(s) This Part Fits: 3523

POWER HARNESS ASSEMBLY Includes: Fuse Holder (RPI Part #RPH904), AC Inlet Receptacle (RPI Part #RPR710), Power Switch/Circuit Breaker (RPI Part #CVS006), heat shrink tubing and mounting hardware Fits: Rear Panel to Transformer Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CVA005

LIQUID LEVEL SENSOR Material: 316 Stainless steel float and brass stem 1/8" MPT Wire leads 9-1/2" and 11" 3/16" insulated QC terminals SPST; 120-240 VAC Fits: Drain Plumbing

STEAM TRAP 1/2" MPT x 1/2" FPT Material: Brass body; stainless steel seat Max. rated pressure: 125 PSI; Max. operating temperature: 450˚F Includes all parts as shown Fits: Jacket or Chamber to Jacket Model's this part fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CST059

PATIENT CABLE - 3 LEAD MULTI-LINK COROMETRICS (GE) Number of Leads: 3 Length: 10 ft. Equipment End: 12-PIN Patient End: Dual/Shielded; Compatable with GE Multi-link® Color: White, Black and Red Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=KCD033

BRUSH CARRIER Includes (2) brushes (RPI Part #CAB083) Fits: Motor Base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAC089

3/8” BONNET & SYLPHON ASSEMBLY Also included in: 3/8" PRV KIT (RPI Part #AMK111)Fits: Steam Control ValveModel(s) This Part Fits:https://www.rpiparts.com/SearchModelList.aspx?rpinum=AMA045

HEATING ELEMENT 120VAC, 1500W, (~9Ω) Mounts to chamber Includes hardware and (2) #8 Ring Terminal (High Temperature) (RPI Part #RPT019) When replacing this part, it is also a good time to replace the Overtemp Switch (RPI Part #AMS098) Model(s) This...

DOOR GASKET KIT Includes: Door Gasket (RPI Part #AMG012) & (32) 1/4-28 Socket Head Screw (RPI Part #AMS049) Also included in: PM Pack (Door, 24" x 36") (RPI Part #AMP248) Fits: Rectangular 24" x 36" Door