RPI

STEAM TRAP 3/8" FPT Material: Stainless steel body and disc Max operating pressure: 600 PSI; Minimum operating pressure: 3.5 PSI Max allowable temperature: 800˚F Includes all parts as shown Also available: Replacement Disc (RPI Part #CSD083) Fits: Steam Line Model(s)...

5 LEADWIRE SET DISPOSABLE 30" DUAL/SNAP ABBOTT Disposable; 10 sets per package Number of Leads: 5; Length: 30" Equipment End: Dual/Shielded; Patient End: Snap Color: Red, White, Green, Black, and Brown Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=LDM307

LAMP (12VDC, 100W) 6 per package Includes: Attached wire harness and connector Halogen Fits: Lamp Holder Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=LMP028

SOLENOID VALVE REPAIR KIT PTFE seal For Green Coil Valves Includes all parts as shown Also available: Solenoid Valve Assembly (RPI Part #CSV014)

HEATER AND FAN ASSEMBLY Fan: 120VAC, 50/60 Hz. Heater: 360W, 120VAC, ~33.0 Ω Includes all parts as shown Does not include the plastic mounting plate. If possible, use the existing mounting plate for installation. Fits: Cover Assembly Model(s) This Part...

STEAM TRAP REBUILD KIT Includes all parts shown Material: Stainless Steel Valve Stem and Seat Fits: Steam Trap

SOLENOID VALVE ASSEMBLY Ports: 1/4 FPT; Piston style valve; 2 way N.C. 120 VAC 60Hz. 6.1W. 110 VAC 50Hz. 8.1W. Stainless Steel body; EPDM seal Also available, Solenoid Valve Repair Kit (RPI Part #CSK020) Fits: 3523 (Sol-5 Slow Exhaust) Model(s)...

RELIEF VALVE 1" MPT x 1" FPT Material: brass body, stainless steel springs, EPDM seal cracking Pressure: 5 PSI Fits: Dedicated Vent System Model(s) This Part Fits: 3622 - 3633

TOP COVER KIT Also available: Adhesive (RTV108) (RPI Part #RPA874), Display PC Board (RPI Part# MIB115), Steam Block (RPI Part #MIB140) and Speednut (RPI Part #PCN136) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIK197

MOTOR ASSEMBLY BIO-DYNAMICS 115VAC, 60 Hz., 1/10 HP, 10,000 RPM Includes motor, and (2) wiring connector Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BDM007

BASE CYLINDER KIT 2.13" OD ~16.25" lg. - Center hole to center hole (retracted) Includes: Cylinder and (6) Cable Tie (12" Black) (RPI Part #RPT375) Also Available: Hydraulic Fluid (RPI Part #RPF384) Fits: Table base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC063

TILT CYLINDER KIT 2.12" OD ~14.75" lg. - Center hole to center hole (retracted) Includes: Cylinder, (4) Cable Ties (RPI Part #RPT279) and (8) Cable Ties (RPI Part #RPT085) Also Available: Hydraulic Fluid (RPI Part #RPF384) Fits: Table base Model(s)...

BACK/FOOT CYLINDER KIT 2.13" OD ~13.25" lg. - Center hole to center hole (retracted) Fits: Table back and foot section Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC065

BASE CYLINDER 2.13" OD x 13.12" center hole to center hole (retracted) Check Serial Numbers for Parts to fit Midmark® • Ritter® Tables & Chairs Series 100, 300 & 400 (Click Here) (Adobe Acrobat PDF) Includes: Cylinder and (6) Cable...

BACK CYLINDER 2.13" OD x 13.12" center hole to center hole (retracted) Check Serial Numbers for Parts to fit Midmark® • Ritter® Tables & Chairs Series 100, 300 & 400 (Click Here) (Adobe Acrobat PDF) Fits: Table Back Model(s) This...

TILT CYLINDER 2.13" OD x 14.75" center hole to center hole (retracted) Fits: Table Base Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC112

TILT CYLINDER 2.13" OD x 14.75" center hole to center hole (retracted) Includes:Cylinder, (8) Cable Tie (8" Black) (RPI Part #RPT085) (4) Cable Tie (8" Black) (RPI Part #RPT279) Also Available: Hydraulic Fluid (RPI Part #RPF384) Fits: Table Base Model(s)...

BACK CYLINDER 2.13" OD x 13.12" (retracted); 18.00" (extended) mounting hole to mounting hole Also Available: Hydraulic Fluid (RPI Part #RPF384) Fits: Table Back Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC114